The facility operates two Municipal Solid Waste (MSW)-fired combustors (MWCs) capable of processing approximately 400 tons per day, using a Martin Stoker system. In addition to firing MSW, each unit is capable of firing auxiliary fuel, such as fuel oil during startup and shutdown. The steam produced by the MWCs is sent to a turbine generator with a nameplate capacity of 23.5 Megawatts. Electrical power generated at the facility is sold through a contract to Pacific Gas & Electric (PG&E).

• Diagram of Process (Diagram)
   
• Pollution Control
  • Air emissions are controlled by high efficiency combustion within the furnace/boiler as well as by selective non-catalytic reduction (SNCR), spray dryer absorbers, fabric filter baghouses and an activated carbon injection system.

• Highly efficient combustion controls potential organic pollutants as well as carbon monoxide.
• The SNCR system injects ammonia into the furnace to control nitrogen oxide emissions;
• Spray dryer absorbers utilize a lime/water slurry mixture to control the boiler outlet gases. The lime slurry mixture neutralizes acid gases, such as sulfur dioxide and hydrogen chloride and cools the outlet gases as well;
• The fabric filter baghouse removes particulate matter (fly ash) and provides a secondary acid gas neutralization surface on the filtercake; and,
• The activated carbon injection system controls mercury emissions.

• CSI also utilizes state-of-the art continuous emissions monitoring systems (CEMS). The CEMS measures the stack gas for emissions, such as carbon monoxide, sulfur dioxide, nitrogen oxides, oxygen and opacity and allows the control room to continuously monitor the performance of each combustor unit. The CEMS data is reviewed and summarized into a report, which is routinely submitted to the San Joaquin Valley Air Pollution Control District (SJVAPCD) and EPA for review. There is a direct link between the CEMS data computer and a SJVAPCD data computer providing the SJVAPCD real time CEMS data.